How to Upgrade from a Pull-out Kitchen Tap to a 3-Way Tap with Water Filter
Upgrading your kitchen tap can significantly enhance convenience, functionality, and water quality. If you’re considering replacing your existing pull out kitchen tap with a 3-way tap that includes a built-in water filter, this guide will walk you through the process, benefits, and considerations tailored for Australian households.
Why Upgrade to a 3-Way Tap with Water Filter?
A 3-way tap is a fantastic addition to any kitchen, allowing you to have hot, cold, and filtered water from a single tap. The benefits include:
-
Better Water Quality – Removes chlorine, fluoride, sediment, and other impurities.
-
Space Saving – No need for an additional water filter faucet.
-
Convenience – Easily switch between tap and filtered water.
-
Sleek Design – Enhances your kitchen aesthetics while providing functionality.
Steps to Replace Your Pull-out Tap with a 3-Way Tap
1. Choose the Right 3-Way Tap
Before purchasing, consider factors like:
-
Material & Finish – Matte black, brushed nickel, or brushed bronze.
-
Filter Compatibility – Ensure it supports commonly available filters in Australia.
-
Installation Type – Verify if it fits your current sink cut-out.
2. Gather Tools & Materials
You’ll need:
-
Adjustable wrench
-
Plumber’s tape
-
Screwdrivers
-
Bucket or towel (to catch any water spills)
3. Turn Off Water Supply
Locate the shutoff valves under the sink and turn them off the household shut off valve may be at the front of the house near the water meter. Open the tap to release any remaining water in the lines.
4. Remove the Existing Pull-out Tap
-
Disconnect the hoses from the water supply.
-
Unscrew the mounting nut holding the tap in place.
-
Carefully lift the old tap out.
5. Install the 3-Way Tap
-
Insert the new tap into the sink hole.
-
Secure it with the mounting nut underneath.
-
Connect the hot and cold hoses to the respective supply lines.
-
Attach the filtered water hose to the filtration system.
6. Install & Connect the Water Filter
-
Mount the filter under the sink following manufacturer instructions.
-
Connect the filtered water hose from the 3-way tap to the filter outlet.
-
Check for any leaks and tighten connections if needed.
7. Test & Enjoy Your New Tap
Turn the water supply back on and test all functions of your new 3-way tap. Ensure the hot, cold, and filtered water flows smoothly.
Maintaining Your 3-Way Tap & Filter
-
Replace filters regularly as per manufacturer guidelines (typically every 6–12 months).
-
Clean the aerator occasionally to prevent build-up.
-
Check for leaks and tighten fittings if necessary.
Final Thoughts
Installing a 3-way tap with a water filter is an excellent investment in your kitchen’s functionality and water quality. If you’re unsure about installation, consider hiring a professional plumber. Enjoy fresh, filtered water straight from your tap without the need for additional fixtures!
For more home improvement guides and kitchen upgrade tips, stay tuned to our blog!
