Thermogroup - Matte Black Flat Pill Single Bar Heated Towel Rail W632xH40xD70mm

Regular price $322.00 Sale price$419.00 Save $97 | 23% OFF
BrandThermogroup
SKU: DSP6B Barcode: 9349970014411
  • Visa
  • Mastercard
  • PayPal
  • Zip
  • Afterpay

The Thermorail DSP6B is a 16W Straight Flat single bar rail finished in Matt Black, sized at 632x40x70mm with 1 bar to warm and dry your towels.

As a 12V unit, the DSP6B can be safely installed close to water in your bathroom's wet zones. A transformer is supplied in the box, so it's ready to wire in as soon as it arrives.

Why choose the DSP6B

  • Straight flat in a Matt Black finish
  • 632x40x70mm — 1 bar rated at 16W
  • #201 Stainless Steel construction
  • 12V transformer included, safe for bathroom wet areas
  • Wall Mounted
  • Also available in Brushed Stainless Steel, Polished Stainless Steel
  • 7 years warranty

Single bar rails like the DSP6B are designed to be installed in a set — we recommend at least three rails together to give enough heated surface area to dry your towels properly. Add a timer to control when it's on and keep running costs down.

Specifications
Heat functionWith heat
Width632 mm
Height40 mm
Wattage16 W
Voltage12 V
Downloads
Warranty

7 Years

Delivery & pickup
  • Pickup from Hamilton Hill, WA
Frequently asked questions

How do I control my heated towel rail?
Thermorails are safe to be left running continuously however most times it is preferable to have the ability to control when your heated towel rail is on and off and thus saving you energy. The majority of the range of Thermorails don’t have a switch on the unit but can be very simply wired to a standard switch. Alternatively, you can wire the Thermorail to a timer that can be programmed to turn on and off to suit your lifestyle.

Can I wire multiple rails to one timer?
Yes, absolutely, you can connect more than one heated towel rail to a single timer. There are just a few things to consider; You cannot exceed the load rating of the timer (this varies from 1 amp to 16 amps depending on the timer), and all the rails wired to one timer will be on at the same time, they cannot be set on individual schedules. Bear in mind that, for all 12volt units, these do still need to be wired through their transformers before being wired to the timer. The addition of a timer makes your life simple and rewarding with warm towels everyday and wiring multiple rails to one timer allows you to achieve this result easily and beautifully.

Do the flat pill single bar heated towel rails require an in-wall mounting system or can they be retrofitted?
Our flat pill single bar rails do not require an in-wall mounting system for installation, and come supplied with a transformer and all required mounts to complete the install. Therefore, provided that your electrician is able to get power down to the mounting points, it is possible for you to retrofit the single bar heated towel rails to an existing tiled wall. You will need to allow for the 12volt transformer, however this is often installed behind a switch plate or in the roof.

Do 12Volt Thermorails get as warm as standard 240Volt Thermorails?
The 12Volt Thermorail range will get as warm and dry your towels as efficiently as the standard 240Volt Thermorails. This is because the amount of heat output is related to the wattage of the rail rather than the voltage. So, a 12Volt Thermorail will put out the same amount of heat as a 240Volt Thermorail with the same wattage.

Do I require a transformer?
Yes, all the Flat Pill Single Bar Rails are 12Volt rails and therefore need to be wired into a 12Volt transformer, however a transformer is supplied with all of our 12Volt rails so there is no need to purchase this separately.

Where should the transformer be installed?
The transformer can be installed in the ceiling or the wall cavity no further than two metres from the rails. If mounting in the wall cavity the transformer must be behind a switch plate to enable access and the transformer needs to have ventilation.

How many flat pill single bar towel rails can I have in a set?
The number of Flat Pill Single Bar 12Volt Rails that you include in a set is only limited by your imagination. To dry and warm your towels effectively you will need a minimum of 3 rails per set.

Do I need to order a mounting system?
No, the Flat Pill Single Bar Rails have all the parts needed for installation. Mounting system is not compatible with these types of rails.

Can I use a Thermorail timer for Low Voltage Heated Towel Rails?
Yes, sure you can! Whilst our Low Voltage Towel Rails are 12volt units and the timers have a 240volt output, a transformer is required for these rails anyway so the Towel Rail can simply be wired into the 12volt side of the transformer, then the 240volt side of the transformer wired into the timer. The timer then switches the transformer, rather than the rail itself, which effectively turns the Towel Rail on or off as set on the timer.

Thermogroup - Matte Black Flat Pill Single Bar Heated Towel Rail W632xH40xD70mm
$322.00$419.00
Free Shipping