Plumber replacing a tap - is a $300-an-hour plumber worth it

Is a $300-an-Hour Plumber Really Worth It to Change a Tap?

November 19, 20262Magpies

Good news first: changing a tap is a very achievable job. With a couple of spanners, some plumber's tape and an hour or two, plenty of handy Aussies could replace a kitchen tap or bathroom basin mixer themselves. So when plumbers are charging up to $300 an hour, plus a call-out fee, it's fair to ask whether it's worth it. This guide covers tap replacement cost in Australia, the pros and cons of DIY, and how to choose the right tap, so you can make the call that suits you.

Jump to your state's plumbing rules: Western Australia | Victoria | New South Wales | Queensland

How much does a plumber cost to replace a tap in Australia?

Most plumbers charge a call-out fee plus an hourly rate, and in the big cities that rate can reach $300 an hour. For a straightforward tap replacement, expect somewhere around $200 to $350 all up, depending on your city and the job. As a benchmark, Sydney Water's Waterfix service has quoted $220 plus a $44 call-out fee to change a kitchen tap.

The price climbs if your isolation valves are seized, your pipes are old, or you're changing tap styles, such as going from two separate taps to a single kitchen mixer tap, or from a hob-mounted tap to wall taps.

Fonix pull-out kitchen mixer tap in matte black

Changing a kitchen tap vs a bathroom tap

A kitchen tap swap is the most common job. Pull-out mixer taps are hugely popular, and most come with flexible hoses that make installation simpler. Bathroom jobs vary more. Replacing basin mixers on a vanity is similar to a kitchen tap, while shower and bath mixers or freestanding bath mixers usually involve in-wall or floor plumbing and are best left to a plumber.

The case for doing it yourself

  • You save the call-out fee and labour, often $200 to $300.
  • Modern taps are designed for easy installation. Our 2Magpies tap range is chosen with simple fitting in mind.
  • You can do it on your own schedule, without waiting for a booking.
  • There's real satisfaction in a job well done.

The case for calling a plumber

  • Insurance. If a DIY connection leaks behind a cabinet and damages your floors or walls, your insurer may question the claim because the work wasn't done by a licensed plumber. A slow leak can cause thousands of dollars in damage before you notice it.
  • Warranty. Some tapware manufacturers require professional installation for their warranty to apply.
  • State plumbing rules. Each state sets its own rules on what homeowners can do themselves. In most, small jobs like washers and shower heads are fine, while replacing a whole tap is meant for a licensed plumber.
  • Tricky setups. Old valves, corroded pipes or a change of tap style can turn a quick job into a big one.

Plumbing rules and regulators by state

Before you pick up a spanner, check what your state allows. These are the official regulators and licensed plumber registers.

Western Australia (Perth)

Building and Energy – homeowner plumbing rules and licensed plumber search. Phone 1300 489 099.

Victoria (Melbourne)

Victorian Building Authority – plumbing and licensed plumber register. Phone 1300 815 127.

New South Wales (Sydney)

NSW Fair Trading – plumbing standards and licence check. Phone (02) 9372 9271.

Queensland (Brisbane)

QBCC – DIY plumbing guide and licensed plumber register. Phone 139 333.

For the full state-by-state breakdown of what you can and can't do yourself, read our most popular guide: Plumbing DIY: Can You Replace a Tap Without a Plumber? For a step-by-step walkthrough, see How to Change a Kitchen Tap.

Tips if you call a plumber

  • Ask for a fixed-price quote rather than an open hourly rate.
  • Check their licence on your state's register above.
  • Have the new tap on site, unboxed, with all parts checked.
  • Clear out the cupboard under the sink before they arrive.
  • Bundle jobs together, such as a kitchen tap and a bathroom basin mixer, so one call-out fee covers both.

Tips if you DIY

Watch our video on how to install a kitchen tap before you start:

  • Check your state's rules first using the links above.
  • Turn off the isolation valves, or the mains, before you start.
  • Make sure the new tap suits your sink: the number of tap holes, the mounting type and your water pressure.
  • Check for drips under the sink over the next few days.

Choose a quality tap that lasts

Whoever fits it, a cheap tap that fails in a year means doing the job twice. Trusted Australian brands like Oliveri tapware and Modern National tapware come with strong warranties and quality finishes. Want a statement look? Browse our gold kitchen taps, or upgrade to a 3-way filter tap for filtered drinking water on tap.

The bottom line: it's your call

Changing a tap is absolutely achievable, and plenty of people do it. Whether you save the $300 an hour or pay for peace of mind with your insurer is entirely up to you. Either way, the most important decision is choosing the right tap.

Shop our full range of kitchen taps and bathroom taps, with delivery Australia-wide, or visit our Perth showroom for help finding a tap that suits your sink and setup.

More articles